RKI GX-2003 Personal Sample Draw 5-in-1 Gas Monitor

Built around our high-quality micro-sensor technology, the GX-2003 is RKI's smallest personal 5-in-1 gas monitor with a built in sample pump. Weighing only 11 ounces, it has many standard features which set the GX-2003 apart from the competition. For example, it can monitor the standard confined space gases (LEL combustibles, Oxygen deficiency, Carbon Monoxide, and Hydrogen Sulfide), however it can also measure 100% volume combustibles and dynamically displays either % LEL or % volume with its auto-ranging ability.

The GX-2003's large LCD display shows all 4 gas readings, battery level, current time, and will automatically backlight in alarm conditions. Each channel has 2 adjustable alarm levels in addition to TWA and STEL readings for Carbon Monoxide and Hydrogen Sulfide. The TWA and STEL readings are equipped with a lunch-break mode, which prevent the average readings from being reset when the unit is turned off.

New Features:
• Barhole mode tests for peak methane and oxygen levels
• Leak detection mode offers high sensitivity tests for ppm level natural gas leaks
• Auto-ranging display of % volume and % LEL

Specifications:
Sensor Range:	Combustibles: 0-100% LEL
	Oxygen: 0-40% by volume
	Hydrogen Sulfide: 0-100 ppm
	Carbon Monoxide: 0-500 ppm
Sensor Type:	Combustibles: Catalytic
	Oxygen: Galvanic Cell
	Hydrogen Sulfide: Electrochemical
	Carbon Monoxide: Electrochemical
Datalogging Intervals:	1 minute
Software:	RKI Datalogging Software
Weight:	11 ounces
Battery Type:	Alkaline AA-size batteries
Run Time:	14 hours (without alarms)
Listings:	UL

Calibration Gas Tip: Due to the flat rate hazardous shipping charges, check your stock, you may want to order a few more
to save!

RKI SM-2003 Stand-Alone Calibration Station

The SM-2003 single module calibration station for the GX-2003 portable gas monitors is a stand-alone station that can calibrate, bump test, charge, and archive data without the need of a computer to operate. The module has 4 operating modes, which include bump test only, % volume methane bump/calibration, calibration only, and bump with automatic calibration (if the bump test fails). The SM-2003 is capable of storing up to 200 bump test or calibration records.

Each module has user adjustable test times and tolerances to meet specific testing requirements. The charger within the module quick-charges battery packs within 90 minutes and will recognize Alkaline batteries. The Calibration Station power requirements are 115/230 VAC, 50/60Hz.

To download the data, each module includes a 64 MB USB flash drive. Also included is a software package to import the data from the USB drive and manage records by serial #, user ID, or station ID.